Tile vs. LVP for a Bathroom Floor | EL 45 PDX
EL 45 PDX
General Contractor, Portland OR

Blog · Flooring

Tile Vs. LVPIn The Bathroom.

How the two most popular bathroom floors compare, and when each one makes more sense.

Two Good Options, Different Strengths

Tile and LVP are the two most common bathroom floors we install. Both handle water well, and both can look great. They differ in cost, feel, durability and how they fit with the rest of the home.

Side By Side

01WaterTile and grout over a sound floor handle water for decades; LVP planks resist water but edges must be sealed
02DurabilityPorcelain tile is very hard-wearing; LVP resists scratches and dents but can be damaged by heavy point loads
03Feel UnderfootTile is hard and cool; LVP is softer and warmer
04InstallationTile is set in mortar, takes longer, and needs a stiff, flat subfloor; LVP is usually a faster floating install
05RepairSingle tiles can be replaced; damaged LVP planks can be swapped, sometimes more easily
06LookTile offers more sizes, patterns and stone looks; LVP gives a consistent wood look that can run through the home
Marble-look porcelain tile floor and shower in a remodeled bathroom
Marble-look porcelain tile on the floor and shower.
LVP flooring being installed in a Hillsboro, Oregon home
LVP going in on a current Hillsboro project.

When Tile Makes More Sense

  • A main or primary bathroom where you want a long-lasting, high-end finish
  • A bathroom with a tiled shower, especially a curbless one where the floor and shower connect
  • Bathrooms that see a lot of water on the floor, such as kids’ baths
  • When you want a specific look, like a stone, patterned or large-format floor

When LVP Makes More Sense

  • Hall and guest bathrooms, and half baths
  • Rental properties, where cost and fast turnover matter
  • Whole-floor updates where the same floor runs from room to room
  • Subfloors that would need significant work to support tile

Either Way, Prep Matters

Both floors depend on what is underneath. Old bathroom floors often have soft spots around the toilet or tub from past leaks, and those need to be repaired before any new floor goes down. We check the subfloor once the old floor is up and fix problems instead of covering them.

We install both. See tile installation and flooring installation, or compare more options in LVP vs. laminate vs. hardwood.

Common Questions

Is LVP Waterproof Enough For A Bathroom?

Many LVP products are rated waterproof, and LVP is common in bathrooms. The planks resist water, but water that gets under the floor at the edges or around the toilet or tub can still reach the subfloor, so the perimeter needs to be finished and sealed properly.

Can LVP Go In A Shower?

No. LVP is a floor covering for the bathroom, not for inside a shower. Showers need tile or another wet-area surface over a waterproof system.

Is Tile Cold On Bathroom Floors?

Tile feels cooler underfoot than LVP. A bath mat helps, and heated floor systems can be installed under tile if you are doing a full remodel.

Which Adds More Value?

Tile is often expected in higher-end bathrooms and main bathrooms. LVP is a practical, budget-friendly choice for hall baths, rentals and whole-floor updates. The best choice depends on the home and how the bathroom is used.

Can You Match The Bathroom To The Rest Of The House?

Yes. Running the same LVP from the hallway into the bathroom gives a seamless look. Tile gives a clear separation and works well with a tiled shower.

Choosing A Bathroom Floor?

Send a few photos and the size of the bathroom, and we can talk through the options.